Phaser 4500
  > Support
  > Knowledge Base
  > FAQ
  > Drivers
  > Supplies

Support Topics
Step by step guides
  >  General Information
  >  Installation/Setup
  >  Errors, Jams, Failures and Other Messages
  >  Troubleshooting Xerox Software
How To
  >  Install Printer Drivers
  >  Printer Setup
  >  Load Paper Trays
  >  Use the Front Panel
  >  Replace Consumables (Toner, Imaging Unit, etc.)



Supported Media / Paper Weights, Sizes and Types

Supported Paper/Media Sizes and Types

To order supplies, click here

Follow the guidelines in these tables to ensure the best print quality and avoid printer jams. For best results, use only Xerox Printing Media specified for your printer; they are guaranteed to produce excellent results with your Phaser 4500 Laser Printer.

Media

Input Output
Media Size Tray 1 Trays 2-4 Standard
Tray
500-Sheet
Stacker
Capacity** 150 550 500 500
Letter (8.5 x 11 in.) Yes Yes Yes Yes
A4 (210 x 297 mm) Yes Yes Yes Yes
A5 (148 x 210 mm) Yes Yes Yes Yes
A6 (105 x 148 mm) Yes Yes Yes Yes
ISO B5 (176 x 250 mm) Yes Yes Yes Yes
B5 JIS (182 x 257 mm) Yes Yes Yes Yes
Index Card (3 x 5 in.) Yes* No Yes No
Statement (5.5 x 8.5 in.) Yes Yes Yes Yes
Executive (7.25 x 10.5 in.) Yes Yes Yes Yes
US Folio (legal 13) (8.5 x 13 in.) Yes Yes Yes Yes
Legal (8.5 x 14 in.) Yes Yes Yes Yes
Envelopes
#10 Commercial (4.12 x 9.5 in.) Yes* Yes* Yes Yes
Monarch (3.87 x 7.5 in.) Yes* Yes* Yes Yes
DL (110 x 220 mm) Yes* Yes* Yes Yes
C5 (162 x 229 mm) Yes* Yes* Yes Yes
B5 (176 x 250 mm) Yes* Yes* Yes Yes

* 1 sided printing only.

** Maximum capacity at 75 g/m ² (20 lb.) paper stock. Capacity is reduced for heavier/thicker stock.

Simplex and Duplex Sizes

Input Output
Media Size Tray 1 Trays 2-4 Standard
Tray
500-Sheet
Stacker
Simplex (1-Sided Printing)
Width 76 – 216 mm
3.0 – 8.5 in.
98 – 216 mm
3.9 – 8.5 in.
76 – 216 mm
3.0 – 8.5 in.
90 – 216 mm
3.5 – 8.5 in.
Height 127 – 356 mm
5.0 – 14.0 in.
148 – 356 mm
5.8 – 14.0 in.
127 – 356 mm
5.0 – 14.0 in.
140 – 356 mm
5.5 – 14.0 in.
Duplex (2-Sided Printing)
Width 90 – 216 mm
3.5 – 8.5 in.
98 – 216 mm
3.9 – 8.5 in.
Same as Input
Height 140 – 356 mm
5.5 – 14.0 in.
148 – 356 mm
5.8 – 14.0 in.
Same as Input

Paper and Media Types and Weights

The Phaser 4500 Laser Printer supports the following paper types and weights in the paper trays:

Paper/Media Type Weight
Bond 60-216 g/m ² (16-58 lb.)
Labels* Xerox A4 24-Up Label Xerox Multipurpose 30-Up Label
Transparency* Xerox Clear Transparency
Greeting Cards 190 g/m ² (70 lb. Cover)
Index Card Stock** 60-216 g/m ² (33-120 lb.)
Tag Card Stock 60-216 g/m ² (37-133 lb.)
Cover Card Stock 60-216 g/m ² (37-133 lb.)

* 1 sided printing only.

**Printing on lighter weight custom 3x5 media is not supported and may result in frequent paper jams.

To order supplies, click here



Document ID: R1008121001

Direct URL to this document (to bookmark this page)
http://www.xerox.com/office/4500kb/,solution=R1008121001